Disc Diameter

&nbsp;<h3>1. What is a Floor Grinding Machine?</h3>A floor grinding machine is a powerful surface preparation tool used to grind, polish, and smooth concrete, stone, marble, and other types of flooring. These machines use rotating diamond-tipped discs or abrasive pads to remove coatings, level uneven surfaces, and prepare substrates for finishing treatments such as epoxy coatings, sealers, or staining.&nbsp;Floor grinders are essential in both residential and commercial flooring projects, including concrete resurfacing, decorative polishing, and industrial floor restoration. They come in various sizes, from handheld models for edge work to large, walk-behind or ride-on machines for big surface areas.&nbsp;<h3>2. Why Rent or Buy a Floor Grinding Machine?</h3>Deciding whether to rent or buy a floor grinding machine depends on your project scope, frequency of use, and budget:<ul><li>Renting a floor grinder is ideal for short-term jobs, DIY renovations, or occasional surface prep work. It’s cost-effective and gives you access to high-performance machines without long-term maintenance or storage concerns.</li><li>Buying a floor grinding machine is the best choice for contractors, flooring professionals, or businesses that regularly handle concrete grinding, epoxy removal, or surface polishing. Ownership ensures immediate access, full control over equipment, and long-term cost savings.</li></ul>Both rental and purchase options help ensure a smooth, even, and properly prepared surface, essential for quality flooring installations and finishes.&nbsp;<h3>3. How to Choose a Floor Grinding Machine?</h3>Choosing the right floor grinding machine depends on the size of your job, surface type, and desired finish. Here’s what to consider:<ul><li>Floor Size &amp; Job Type: For large commercial areas, opt for a walk-behind or ride-on floor grinder with high horsepower and wide grinding paths. For edges, corners, or tight spaces, choose handheld or smaller models.</li><li>Grinding Disc Type: Select the appropriate diamond tooling based on the hardness of the surface and desired finish (e.g., coarse for removal, fine for polishing).</li><li>Wet vs. Dry Grinding: Wet grinding reduces dust and cools the surface, while dry grinding offers faster results with a dust collection system. Choose based on site conditions.</li><li>Power Source: Machines are available in electric, gas, or propane-powered options. Electric is quieter and suitable for indoor use; propane and gas are more powerful for outdoor or industrial projects.</li><li>Dust Control: Ensure the machine is compatible with a vacuum or dust extraction system to maintain OSHA compliance and a clean worksite.</li><li>Speed &amp; Pressure Adjustability: Look for models with variable speed control and adjustable grinding pressure to fine-tune performance for different s</li></ul>

&nbsp;<h3>1. What is a Floor Grinding Machine?</h3>A floor grinding machine is a powerful surface preparation tool used to grind, polish, and smooth concrete, stone, marble, and other types of flooring. These machines use rotating diamond-tipped discs or abrasive pads to remove coatings, level uneven surfaces, and prepare substrates for finishing treatments such as epoxy coatings, sealers, or staining.&nbsp;Floor grinders are essential in both residential and commercial flooring projects, including concrete resurfacing, decorative polishing, and industrial floor restoration. They come in various sizes, from handheld models for edge work to large, walk-behind or ride-on machines for big surface areas.&nbsp;<h3>2. Why Rent or Buy a Floor Grinding Machine?</h3>Deciding whether to rent or buy a floor grinding machine depends on your project scope, frequency of use, and budget:<ul><li>Renting a floor grinder is ideal for short-term jobs, DIY renovations, or occasional surface prep work. It’s cost-effective and gives you access to high-performance machines without long-term maintenance or storage concerns.</li><li>Buying a floor grinding machine is the best choice for contractors, flooring professionals, or businesses that regularly handle concrete grinding, epoxy removal, or surface polishing. Ownership ensures immediate access, full control over equipment, and long-term cost savings.</li></ul>Both rental and purchase options help ensure a smooth, even, and properly prepared surface, essential for quality flooring installations and finishes.&nbsp;<h3>3. How to Choose a Floor Grinding Machine?</h3>Choosing the right floor grinding machine depends on the size of your job, surface type, and desired finish. Here’s what to consider:<ul><li>Floor Size &amp; Job Type: For large commercial areas, opt for a walk-behind or ride-on floor grinder with high horsepower and wide grinding paths. For edges, corners, or tight spaces, choose handheld or smaller models.</li><li>Grinding Disc Type: Select the appropriate diamond tooling based on the hardness of the surface and desired finish (e.g., coarse for removal, fine for polishing).</li><li>Wet vs. Dry Grinding: Wet grinding reduces dust and cools the surface, while dry grinding offers faster results with a dust collection system. Choose based on site conditions.</li><li>Power Source: Machines are available in electric, gas, or propane-powered options. Electric is quieter and suitable for indoor use; propane and gas are more powerful for outdoor or industrial projects.</li><li>Dust Control: Ensure the machine is compatible with a vacuum or dust extraction system to maintain OSHA compliance and a clean worksite.</li><li>Speed &amp; Pressure Adjustability: Look for models with variable speed control and adjustable grinding pressure to fine-tune performance for different surfaces.</li></ul>

Floor Grinding Machine

清洁设备

Peralatan Pembersihan

&nbsp;<h3>1. What is Cleaning &amp; Surface Preparation Equipment?</h3>Cleaning &amp; Surface Preparation Equipment refers to a broad range of machines and tools designed to clean, strip, and prepare surfaces before applying coatings, paint, finishes, or undergoing maintenance. These machines are essential in construction, manufacturing, marine, automotive, and industrial maintenance where surface integrity and cleanliness are critical. Common Equipment Includes:<ul><li>Industrial pressure washers</li><li>Abrasive blast machines (sandblasters, shot blasters)</li><li>Floor grinders and scarifiers</li><li>Steam cleaners</li><li>Industrial vacuums</li><li>Chemical sprayers and degreasers</li></ul>Applications:<ul><li>Removing grease, oil, rust, and paint</li><li>Surface profiling for coatings and adhesives</li><li>Concrete floor cleaning and leveling</li><li>Pre-treatment for industrial painting or welding</li></ul>&nbsp;<h3>2. Why Rent or Buy Cleaning &amp; Surface Preparation Equipment?</h3>Benefits of Renting<ul><li>Cost-Efficient for Short-Term Projects: Avoid large upfront costs for temporary or occasional use.</li><li>Access to a Variety of Tools: Rent the exact machine you need for each task.</li><li>No Maintenance Burden: The rental provider handles repairs and servicing.</li><li>Latest Technology: Use modern, high-performance equipment without capital investment.</li><li>Flexible Rental Periods: Daily, weekly, or monthly options to suit project timelines.</li></ul>Ideal for contractors, seasonal work, and one-off industrial cleaning or renovation jobs.&nbsp;Benefits of Buying<ul><li>Cost-Effective Long-Term: Lower overall cost for frequent or permanent use.</li><li>Immediate Availability: Avoid delays—equipment is always ready on-site.</li><li>Customized Fleet: Own the right mix of tools tailored to your workflows.</li><li>Asset for Your Business: Adds value and reduces dependence on external suppliers.</li><li>Consistent Performance: Train your team on familiar equipment.</li></ul>Recommended for industrial facilities, painting contractors, and maintenance crews with regular prep tasks.&nbsp;<h3>3. How to Choose Cleaning &amp; Surface Preparation Equipment?</h3>Choosing the right equipment ensures efficient workflow, optimal surface finish, and cost-effectiveness.<ul><li>Surface Type &amp; Condition: Concrete, steel, wood, or composite materials may require different machines or tools.</li><li>Cleaning or Prep Method: Do you need abrasive blasting, pressure washing, grinding, or chemical stripping?</li><li>Job Scale: Larger surface areas may need ride-on or high-capacity machines, while smaller jobs suit handheld or compact models.</li><li>Mobility Needs: Consider equipment size, power source (electric, diesel, pneumatic), and site accessibility.</li><li>Power Source &amp; Environment: Electric machines are suitable for indoor use; petrol/diesel-powered machines work better outdoors or on remote sites.</li><li>Dust Control &amp; Safety: Look for models with integrated dust extraction, HEPA filters, or vacuum compatibility to meet health and safety standards.</li><li>Operator Experience: Choose user-friendly machines with intuitive controls if staff are not highly specialized.</li><li>Availability of Accessories: Ensure compatibility with hoses, blast media, pads, chemicals, or floor attachments.</li></ul>

Cleaning & Surface Preparation Equipment

Toku

Malaysia

14" Concrete Floor Grinder Without Vacuum

Applications:
- Removing paint, pebble Crete in concrete (not epoxy applied), stains, tar, rubbery compounds, mortar -droppings, and ceramic. Tile mortar residue, stencilcrete.
- Not suitable for terrazzo or marble.

Features:
- Easy to use.
- Can be wet.
- Diamond stones to ensure long-lasting.
- Single-phase Electric Motor to ensure convenience at any job site.
- Sturdy Built Body to ensure durability.
- Grinding Width of 14" (inches) for job efficiency.
- Diamond stones can be replaceable.

Selangor (KL, Putrajaya)

2025 TKCG-410 Toku Floor Grinding Machine Without Vacuum 14" Concrete Floor Grinding Machine Without Vacuum Floor Grinding Machine Without Vacuum Floor Grinding Machine Cleaning & Surface Preparation Equipment Light Equipment & Tools

TKCG-410 Toku Floor Grinding Machine Without Vacuum

14" Concrete Floor Grinding Machine Without Vacuum

TCM 

General Specifications

Model: Komatsu FD70E-5
Type: Diesel Forklift
Application: Ideal for heavy-duty material handling in warehouses, construction sites, and industrial facilities.
Technical Specifications

Performance
Load Capacity: ~7,000 kg
Lift Height: ~3,000 mm (standard mast)
Lift Speed: ~500 mm/s (loaded), ~600 mm/s (unloaded)
Lowering Speed: ~500 mm/s (loaded), ~600 mm/s (unloaded)
Travel Speed: ~20 km/h (loaded), ~22 km/h (unloaded)
Engine
Engine Type: Komatsu SAA4D95LE-5 diesel engine
Engine Power: ~55 kW (74 HP)
Fuel Tank Capacity: ~70 liters
Dimensions and Weight
Weight: ~9,500 kg (operating weight)
Overall Length: ~3,500 mm
Overall Width: ~1,500 mm
Overall Height: ~2,500 mm (standard mast)
Features
Mast Type: Standard 2-stage or 3-stage mast options.
Tires: Pneumatic or cushion tires depending on application.
Operator Comfort: Ergonomic design with adjustable seat and controls.
Safety Features: Overhead guard
TCM FD25T3
The TCM FD25T3 is a diesel-powered forklift designed for medium to heavy-duty material handling tasks. Below are the typical specifications for the TCM FD25T3:

General Specifications

Model: TCM FD25T3
Type: Diesel Forklift
Application: Ideal for material handling in warehouses, construction sites, and industrial facilities.
Technical Specifications

Performance
Load Capacity: ~2,500 kg
Lift Height: ~3,000 mm (standard mast)
Lift Speed: ~500 mm/s (loaded), ~600 mm/s (unloaded)
Lowering Speed: ~500 mm/s (loaded), ~600 mm/s (unloaded)
Travel Speed: ~18 km/h (loaded), ~20 km/h (unloaded)
Engine
Engine Type: Isuzu C240 diesel engine
Engine Power: ~35 kW (47 HP)
Fuel Tank Capacity: ~50 liters
Dimensions and Weight
Weight: ~3,500 kg (operating weight)
Overall Length: ~3,000 mm
Overall Width: ~1,200 mm
Overall Height: ~2,200 mm (standard mast)

Johor

Lim Kok Yong

FD-25T3 TCM  Diesel Forklift Forklift Material Handling

FD-25T3 TCM  Diesel Forklift

Airman

1998 PDS655S4B2 Airman Air Compressor Generator & Air Compressor

PDS655S4B2 Airman Air Compressor

2010 TSLP-150 Toku Diesel Engine Water Pump Pump  Other Categories

TSLP-150 Toku Diesel Engine Water Pump

Mikasa

Reconditioned Reversible Plate Compactor powered by Diesel Engine Electric Start

MVH-303 Mikasa Plate Compactor  Compaction Equipment

MVH-303 Mikasa Plate Compactor

1995 PDS175S Airman Air Compressor Generator & Air Compressor

PDS175S Airman Air Compressor

TOKU BAR CUTTER 42MM with VIKYNO RV125 Diesel Engine

TKBC Toku Rebar Cutter Concrete Equipment

TKBC Toku Rebar Cutter

2012 TSLP-150 Toku Diesel Engine Water Pump Pump  Other Categories

- HIGH PERFORMANCE
- LOW COST
- A QUALITY PRODUCT

TW 5000 has been designed in line with development and improved technologies in the mechanical and hydraulic fields. It is economical, competitive, affordable, versatile, durable, practical, efficient, safe, and maintenance low. Also, all parts and components are easily available locally.

The Road Curb Machine brings you smooth and fine finishing work, greater consistency, faster production, increased profit, and enhances environmental architectural beauty.

Let me know if you need any modifications or formatting changes!


2025 TW-5000 Toku Road Curb Machine Light Equipment & Tools

TW-5000 Toku Road Curb Machine

2014 SDG45S-3A8 Airman Generator Generator & Air Compressor

SDG45S-3A8 Airman Generator

Thermoplastic Preheater is used for preheating, melting, and stirring paint continuously, preparing hot melt materials for the thermoplastic machine during long-distance road line marking work. Good thermoplastic melter for road marking.

TKTP-220 Toku Everything Else Thermoplastic Preheater Everything Else

TKTP-220 Toku Everything Else

Thermoplastic Preheater

Model: GTJZ12
Condition : New
Max Working Height: 13.8Meter
Max Platform Height: 11.80Meter
Safe Working Load: 320kg 
Extend Platform Safe Working Load: 113kg
Overall Dimensions (L x W x H,Guardrail folded):2.5 x 1.19 x 2.05 Meter
Overall Dimensions (L x W x H,Guardrail is not folded):3.2 x 1.19 x 2.585 Meter
Battery: 4 x 6V/200ah
Charger : 24V/30A
Total Weight  2860kg


*Machine Available for Rental too
*Welcome for view & test the machine 
*Price :Rm 48000 (Negotiable)
*Interest pls call ,Mr Yong 0123767535

2024 GTJZ12 Electric Scissor Lift Scissor Lift Aerial Working Platform

GTJZ12 Electric Scissor Lift

A pump for mixing and pumping flowable grout. Used only for wet mix grout.

TSC-120 Toku Electrical Cement Grout Pump Grout Pump Electrical Cement Grout Pump Cement Grout Pump Concrete Equipment

TSC-120 Toku Electrical Cement Grout Pump

Grout Pump

Features:
-Heavy Duty Frame with 4 Wheels.
-2 Wheels with Locking Device.
-Graduated Scale.
-Easy Access to Blade.
-Cutting Head with Balancing Spring.

Benefits:
-Easy movement on site.
-Secure machine during Cutting Operations.
-Repeatability of Cutting Depth.
-Save time for tool change.
-Accurate Positioning.

TBS-600M Toku Masonry Cutter 24" Masonry Saw Masonry Cutter Demolition Equipment Light Equipment & Tools

TBS-600M Toku Masonry Cutter

24" Masonry Saw

Vikyno RV-125 or Changchai RK 125 diesel engine

2023 TKBB-42 Toku Rebar Bender Used Bar Bender 42mm Rebar Bender Concrete Equipment

TKBB-42 Toku Rebar Bender

Used Bar Bender 42mm

TKR-3000 Ride On 3 ton Vibratory Roller is a mid-sized ride-on roller designed for optimal performance on medium-sized construction sites. Ideal for sub-layer and asphalt compaction, this roller delivers a perfect blend of power, efficiency, and ease of operation.

- Vibration System Lever: Front Vibration, Rear Vibration, or Dual Vibration for versatile compaction options.
- Drive/Travel Mode: Bidirectional Forward and Reverse modes for enhanced maneuverability on the construction site.
- Headlight: Illuminate the roadway and ensure fatigue-free and safe operation, even in low-light conditions.
- Water Pump:Benefit from a pressurized and fully corrosion-proof water pump system, ensuring efficient compaction with minimal maintenance.
- Features: Equipped with a durable CHANGCHAI ZN390Q diesel engine for reliable and sustained performance.
- Engineered to be fuel economical, contributing to cost-effective operations.
- Designed for ease of operation, ensuring efficient and seamless usage on the construction site.
- Available with double drum vibration, enhancing compaction efficiency for superior results.

2025 TKR-3000 Toku Tandem Roller Compaction Equipment

TKR-3000 Toku Tandem Roller

2019 MRH-601DS Mikasa Walk Behind Roller Compaction Equipment

MRH-601DS Mikasa Walk Behind Roller

2010 SDG45S-3A8 Airman Generator Generator & Air Compressor

Miller

The Big Blue 600DX welder-generator boasts several key features that make it a standout choice:

 1. Powerful Performance: The Big Blue 600DX delivers robust welding power, making it suitable for a wide range of applications.
 2. EPA Tier 4i Compliance: The engine meets stringent environmental standards, ensuring reduced emissions and environmental impact [https://www.millerwelds.com/files/owners-manuals/O133929R_MIL.pdf].
 3. Quiet Operation: With rated sound levels as low as 73.2 dB at 7 meters, it minimizes noise disruption during operation2 [https://www.millerwelds.com/~/media/miller%20electric/files/pdf/products/international%20spec%20sheets/engine%20driven/edx10-11.pdf?la=en].
 4. Service Accessibility: Convenient right-side service access with intervals of 500 hours for oil and filter changes [https://www.millerwelds.com/~/media/miller%20electric/files/pdf/products/international%20spec%20sheets/engine%20driven/edx10-11.pdf?la=en].
 5. Reliable Engine: The direct-injected, air/oil-cooled engine maintains full load sound levels of 76.8 dB at 7 meters [https://www.millerwelds.com/files/owners-manuals/O133929R_MIL.pdf].

2005 Big Blue 600DX Miller Diesel Welding Set Welding Machines Light Equipment & Tools

Big Blue 600DX Miller Diesel Welding Set

Japan

Recond Japan Bar Bending Machine powered Electric 415v

40 Japan Rebar Cutter Concrete Equipment

40 Japan Rebar Cutter

2018 MRH-601DS Mikasa Walk Behind Roller Compaction Equipment

1994 PDS175 Airman Air Compressor Generator & Air Compressor

PDS175 Airman Air Compressor

The TKR-750 Double Drum Vibratory Roller features a compact and maneuverable design, an adjustable handlebar with vibration-dampening for comfort, and a reinforced steel frame for durability. 

It has dual vibration, user-friendly controls, and a fuel-efficient diesel engine for longer operation.

The corrosion-resistant water tank ensures consistent drum lubrication, while the high-torque hydraulic drive system provides smooth power transmission.

Maintenance is minimized with easy-access components and heavy-duty bearings.

2025 TKR-750 Toku Walk Behind Roller Compaction Equipment

TKR-750 Toku Walk Behind Roller

TKGC-500 Concrete Groove Cutter is built for creating rebates in floor slabs for joint repairs. Also anti-skid for cow sheds and dairy farms.

The system also works on the bridge deck, airport runways, highways and in warehousing when demarcation lines have to be recessed for durability and longer life. Also fine non-slip rib lines on pedestrian walkways, station platforms and similar.

Features:
	1. Low consumption
	2. Easy deep
	3. High quality material
	4. Durable

Applications:
	1. Embankment
	2. Backfilling Work
	3. Roadbed Compaction 
4. Asphalt Surfacing Work

TKGC-500 Toku Everything Else 500MM Concrete Groove Cutter Everything Else

TKGC-500 Toku Everything Else

500MM Concrete Groove Cutter

1. The TKSB-25 25mm Rebar Spiral Bender is engineered for precision and durability, making it ideal for various rebar bending applications.

2. Its heavy-duty construction ensures long-lasting performance, while the precision-guided bending mechanism delivers consistent results with minimal effort.

3. Equipped with an intuitive control panel, it allows for easy operation and quick adjustments. The advanced cooling system prevents overheating, enhancing overall efficiency and longevity.

Additionally, its compact design and integrated lifting handles enable easy transportation and setup, making it a versatile choice for both workshop and on-site applications.

2025 TKSB-25 Toku Rebar Bender Concrete Equipment

TKSB-25 Toku Rebar Bender

2014 SDG60 Airman Generator Generator & Air Compressor

SDG60 Airman Generator

Bomag

The BOMAG BPR 30 Diesel Engine is a reversible plate compactor commonly used in construction for compacting soil, gravel, asphalt, and other materials.

BPR30 Bomag Plate Compactor  Compaction Equipment

BPR30 Bomag Plate Compactor

TBS-900M Toku Masonry Cutter 36" Masonry Saw Masonry Cutter Demolition Equipment Light Equipment & Tools

TBS-900M Toku Masonry Cutter

36" Masonry Saw

The AC8400 Diamond Ring Saw features a high-frequency cutting system for enhanced precision and efficiency. 
-Its ergonomic anti-vibration handle ensures operator comfort during extended use, while the reinforced blade guard provides added safety. 
-Equipped with a smart cooling mechanism, it reduces overheating and extends blade life. 
-The compact and lightweight design allows for greater maneuverability, making it ideal for confined spaces.

Floor Grinding Machine For Sale

Buy new and used Floor Grinding Machine